07837880027 Hatches for Flue in Voilds Fitters CR3 Caterham CR6 Thornton Heath CR7 Croydon Gas Flue Inspectors Kenley CR0 Shirley CR2 Waddon

Gas boilers - Access Hatches for Flues in Voids Installation – Installers

Who gets effected?

Urgent action is required as changes come into effect on 1 January 2013 where flues (from room sealed fan assisted gas boilers) located inside a void must be fitted with inspection hatches for your gas engineer to be able to inspect it and pass as safe.

As this deadline is fast approaching, registered heating gas safe engineers will be forced to place boilers ‘At Risk’.   If you are a homeowner, Landlord, tenant, letting agent, housing association, management company, estate agent. If you have not acted on this it may leave you or your tenants with no heating or hot water!

Background: Typical flue within a ceiling void

The introduction of fan-flued gas appliances in the mid 1990s allowed gas central heating boilers to be installed away from external walls. This meant that builders could design new-build and refurbishment properties with boilers being installed on internal walls to make better use of the available space. The flues to these boilers were, in some cases, routed through voids in the ceiling space (and through stud walls) between properties above.

This practice became progressively more popular from 2000 onwards and the vast majority of affected systems are thought to be located in new build flats and apartments completed since 2000. It is however possible that other types of home may have similar central heating systems installed.

Gas engineers are legally required to check the flue after carrying out any work on the boiler. This will include a visual inspection. Similarly, when an engineer installs a boiler they need to ensure that it can be used without constituting a danger to anyone; this would include checking whether the flue is safe. The original installer and every subsequent servicing or maintenance engineer need to be able to check that:

• - The flue is continuous throughout its length;
• - All joints are correctly assembled and are appropriately sealed; and
• - The flue is adequately supported throughout its length.

An inspection hatch in a ceiling

The original industry technical guidance (aimed at registered gas engineers) advised that where the flue to the boiler was concealed within a void and could not be visually inspected it should be assessed as "not to current standards" (NCS) in accordance with the Gas Industry Unsafe Situations Procedure, This was dependent on there being no other risks being present which may have made the boiler unsafe.

Revised guidance takes effect on 1st January 2011. This is the result of the industry working group who undertook a review of the original guidance and concluded that the potential risk from such systems, should it not be possible to inspect the flue, requires an alternative approach to ensure that the necessary remedial action is taken.

Action required:

The revised technical guidance requires inspection hatches to be fitted in properties where the flue is concealed within voids and cannot be inspected. The homeowner (or landlord etc.) has until 31st December 2012 to arrange for inspection hatches to be installed. Any gas engineer working on affected systems after 1st January 2013 will advise the homeowner that the system is "at risk" (AR) in accordance with the GIUSP and, with the owner's permission will turn off the gas supply to the boiler so it cannot be used.

In the interim period, where no inspection hatches are fitted, the registered gas engineers will carry out a simple risk assessment which should ensure that the risk from exposure to CO is managed in the short-term. This risk assessment includes:

- Looking for signs of leakage along the flue route; and

- Carrying out a flue combustion analysis check (and obtaining a satisfactory result); and

- Checking for the presence of suitable audible carbon monoxide (CO) alarms (and installing such alarms where they are not already fitted).

If you are unsure whether a property has concealed gas flues and think you might be at risk:

- If you have your gas appliances checked annually by us, our Gas Safe registered engineer he/she will be able to advise whether this Notice applies to your property.

- If you do NOT have your boiler regularly serviced arrange for this to be done

  If a property has concealed flues in voids and no inspection hatches:

- If the property is less than 2 years old contact the original builder for assistance with the retrofitting of inspection hatches and repair of any flue defects.

- If the property is between 2 and 10 years old contact the home warranty provider as you may be covered by them if there      are defects in the flue.  

Warning ! Things that you are not to do yourselves!:

• Attempt to check the flue system yourself (unless you are a gas safe registered engineer) You are likely to do more harm to      the installation and place you and your family at greater risk.
• Try to install inspection hatches yourself. You may damage other key functions of the ceiling, such as fire and noise      proofing.

If you live in rented accommodation and think your property might be affected:

Bring this Notice to the attention of your landlord or managing agent. It is the responsibility of the landlord to ensure that inspection hatches are installed and that the boiler and flue are checked every year.

If you think you are suffering the symptoms of CO poisoning:

• Turn the appliance off immediately and contact the National Gas Emergency Service on 0800 111 999.
• If you think you or your family experience any of the symptoms of CO poisoning^[10]

We recommend you to have your flue & all gas appliances safety checked alongside yearly service for your own safety

What our gas safe registered engineers can do :

- We can provide you with landlords gas safety certificates

- Gas Safe registered engineer can service your boiler yearly

- We can fit Carbon Monoxide detectors where necessary

- We can also provide panels with an acoustic rating to 28db

- We can also fit larger access panels, these may allow an engineer to actually carry out repairs rather than the standard size which allow inspection only

A Gas safety Certificate is a record, also referred to as a certificate, that is required by law to be held for all rental accommodation in the UK where there are gas appliances present. The requirement is enshrined in the Gas Safety (Installation and Use) Regulations 1998. The law requires all gas appliances in a rented property to be checked annually, with a gas safety record being completed and a copy provided to tenants.

Gas safety records must  completed by engineers who must be registered with the Gas Safe Register scheme which took over form the previous CORGI scheme in 2009. We have reliable gas safe (ex corgi) registered engineers who can assist you on this whenever you need this done we are always here for you 24 hours a day 7 days a week and we cover all areas of Central London (City London), East Central & West Central London, City of London and  Westminster, West End London (West), Northwest London, East London, North London, Enfield, Southwest London, Southeast London, Enfield, Bromley & Kent, Croydon, Richmond & Twickenham, Uxbridge, Essex, Uxbridge, Dartford, St.Albans and all surrounding areas

Bromley & Kent : BR1 Bromley, Bickley, BR1 Downham Bromley, Lewisham , BR2 Bickley, Hayes, Bromley Common, Shortlands , BR2 Keston , BR3 Beckenham, Eden Park, Elmers End, Park Langley, Western area of Shortlands Bromley, Lewisham , BR4 West Wickham , BR5 Orpington , St Paul's Cray, St Mary Cray, Petts Wood , BR5 Orpington, Farnborough, Downe, Pratt's Bottom BR6 Chelsfield, Well Hill Bromley, Sevenoaks , BR7 Chislehurst, Elmstead , BR8 Swanley,Croydon : CR0 Croydon, Addiscombe, Shirley, Addington CR1 New Addington, Forestdale, Waddon, Beddington, CR2 South Croydon, Sanderstead, Selsdon, Part of Addington, Excess Hatches for Flues in Voids, Flue Inspection Hatches , New Hatches Installation, Gas Boiler Flue Hatches Renew, commercial gas flue in voids install engineers CR3 Caterham, CR3 Whyteleafe Chaldon Woldingham, CR4 Mitcham, Beddington Corner, CR5 Coulsdon, Parts of Chipstead and Woodmansterne, CR6 Warlingham, parts of Chelsham and Farleigh, CR7 Thornton Heath, CR8 Purley, Kenley, CR8 Croydon,Dartford,Kent : DA1 Dartford, Crayford, Barnes Cray, DA1 Dartford, Bexley, DA2 Dartford, Stone, Joydens Wood (part), Wilmington, Bean, DA2 Dartford, Sevenoaks, DA3 Longfield, Hartley, Fawkham,DA3 Dartford, Sevenoaks, DA4 Dartford, South Darenth, Farningham, Eynsford, DA5 Bexley, Albany Park, Joydens Wood, DA6 Bexley, Dartford, DA6 Bexleyheath, Upton, DA7 Bexleyheath(some parts are in SE2), Barnehurst, DA8 Erith, Northumberland Heath, DA8 Slade Green, DA9 Greenhithe, Stone DA9 Darford, DA10 Swanscombe, Ebbsfleet, 24Hour boiler Flue in voids fitting experts, flues in voids, inspection hatches for flues in voids, flues in voids gas safe, gas flue hatches, gas flue inspection hatch installation DA10 Dartford, DA11 Gravesend (west), Northfleet, DA12 Gravesend (east), DA13 Meopham, Gravesham, DA14 Sidcup, Foots Cray, Albany Park, Longlands, Ruxley Wood, Bexley, Bromley, DA15 Sidcup, Blackfen, Longlands, Lamorbey, Avery Hill, DA16 Bexley, Greenwich, DA17 Welling, Falconwood, East Wickham, DA17 Bexley, Belvedere, Lessness Heath, DA18 Erith Marshes DA18 Bexley,Bexley,Essex & East London Areas : RM1 Romford Havering , RM2 Romford , Gidea Park, Heath Park Havering,RM3 Romford, Harold Wood, Harold Hill, Noak Hill Havering , RM4 Romford, Havering-atte-Bower, Abridge, Stapleford Abbotts, Noak Hill, Navestock, Stapleford Tawney, Stapleford Aerodrome Havering, Epping Forest, Brentwood , RM5 Romford, Collier Row Havering, Redbridge , RM6 Romford Chadwell Heath, Marks Gate, Little Heath Barking and Dagenham, Redbridge, Havering , RM7 Romford Rush Green, Mawneys, Romford Havering , RM8 Dagenham, Becontree Heath Barking and Dagenham, Redbridge , RM9 Dagenham, Becontree Barking and Dagenham, Redbridge, Havering , RM10 Dagenham Barking and Dagenham , RM11 Hornchurch, Emerson Park, Ardleigh Green Havering , RM12 Hornchurch, Elm Park Havering , RM13 RAINHAM Rainham, South Hornchurch, Wennington Havering , RM14 Upminster, Cranham gas safety certificate, new boiler cost, inspection hatches for flues, inspection hatch for flue, inspection hatches for gas flues, boiler flue North Ockendon, Bulphan Havering, Thurrock , RM15 South Ockendon, Aveley Thurrock, Havering , RM16 Grays Chafford Hundred, Chadwell St Mary, North Stifford, Orsett Thurrock , RM17 Grays, Badgers Dene Thurrock , RM18 Tilbury, East Tilbury, West Tilbury Thurrock , RM19 Purfleet Thurrock , RM20 GRAYS West Thurrock, South Stifford Thurrock, IG1 Ilford Redbridge , IG2 Ilford , Gants Hill, Newbury Park Redbridge , IG3 Ilford , Seven Kings, Goodmayes Redbridge , IG4 Ilford , Redbridge Redbridge , IG5 Ilford, Clayhall Redbridge , IG6 Ilford, Barkingside, Hainault Redbridge , IG7 Chigwell, Epping Forest, Redbridge , IG8 Woodford Green, Woodford Bridge Redbridge, Waltham Forest , IG9 Buckhurst Hill Epping Forest , IG10 Loughton, High Beach (part) Epping Forest , IG11 Barking Barking and Dagenham,Southend-On-Sea : SS0 WESTCLIFF-ON-SEA Southend-on-Sea, Westcliff-on-Sea Southend-on-Sea , SS1 Westcliff-On-Sea, Southend-on-Sea, Thorpe Bay , SS1 Southend-on-Sea, Thorpe Bay Southend-on-Sea , SS2 Prittlewell, Southend-on-Sea Southend-on-Sea , SS3 Shoeburyness Rochford, Southend-on-Sea , SS4 Rochford Rochford , SS5 Hockley Rochford , SS6 Rayleigh Rochford , SS7 Hadleigh, South Benfleet, Thundersley Castle Point , SS8 Canvey Island Castle Point , SS9 Eastwood, Leigh-on-Sea Southend-on-Sea , SS11 Wickford Basildon, Chelmsford, Rochford , SS12 Wickford Basildon , SS13 Basildon Basildon , SS14 Basildon , SS15 Laindon, SS16 Langdon Hills Basildon , SS17 new boiler, flue inspection hatches, gas flue inspection hatches, cost of new boiler, new gas flue regulations, boiler flues in voids Corringham, Stanford-le-Hope Thurrock , SS22 Southend-on-Sea,Kent : TN Royal Tunbridge Wells (town centre), TN1 Tunbridge Wells, TN2 Royal Tunbridge Wells, Pembury, Kent,TN2 Tunbridge Wells,Bromley,Kent TN3 Langton Green, TN4 Rusthall, Tunbridge Wells, TN5 Wadhurst, Ticehurst, Tidebrook, Stonegate, TN5 Rother, Wealden, TN6 Black Hill, Boars Head, Burnt Oak, Castle Hill, Friars Gate, Mark Cross, TN6 Rotherfield, Kent, St Johns, Stone Cross, Town Row, TN6 Crowborough, Wealden, TN7 Hartfield, Wealden, TN8 Sevenoaks, Tandridge, TN9 Tonbridge and Malling, TN10 Tonbridge and Malling, Kent, TN11 Sevenoaks, Tonbridge and Malling, Tunbridge Wells, TN11 Penshurst, TN12 Maidstone, Tonbridge and Malling, Tunbridge Wells, TN12 Paddock Wood, Staplehurst, TN13 Sevenoaks, Riverhead, TN14 Bromley, Sevenoaks, TN14 Cudham, TN15 Kemsing, Ightham, Wrotham, TN15 Sevenoaks, Tonbridge and Malling, TN16 Biggin Hill, Tatsfield, TN16 Bromley, Sevenoaks, Tandridge, TN17 Cranbrook, Goudhurst, Benenden, Frittenden, TN17 Ashford, Tunbridge Wells, TN18 Hawkhurst, Sandhurst, TN18 Tunbridge Wells, TN19 Etchingham, TN19 Rother, TN20 Wealden,Mayfield gas flues in voids, boiler installation cost, gas inspection hatches, gas safe inspection hatches, cost of a new boiler, combi boiler prices , TN21, Rother, Wealden, TN22 Uckfield, Wealden, TN23 Ashford (town centre), TN24 Ashford , TN25 Challock, Wye, Stowting, Shepway, TN25 Challock, Wye, Stowting, TN26 Bethersden, Woodchurch, Shadoxhurst, Ashford, TN27 Headcorn, Biddenden, Kent, Maidstone, TN28 New Romney, Greatstone-on-Sea, Littlestone-on-Sea, TN28 Shepway, TN29 Lydd, Shepway, Romney Marsh, TN30 Tenterden, TN31 RYE, Rother, TN32 Robertsbridge,TN33 Battle, Rother, Wealden, TN34 Hastings town centre, TN35 Hastings, Pett, Guestling, Westfield, TN36 Winchelsea, Icklesham, Winchelsea TN37 Hastings (St Leonards), St.Leonards-On-Sea ,TN38 Hastings (St Leonards, Silverhill, Wishing Tree, North Hastings, Bulverhythe), Hastings, TN39 Bexhill-on-Sea, Cooden, TN40 Bexhill-on-Sea, Bexhill-On-Sea